Big Baby Revolver from Hellboy 2
Model dimensions - length - 677 mm - height - 508.5 mm - width - 232 mm
The model consists of parts: Barrels body screw...
Model dimensions: - length - 677 mm - height - 508.5 mm - width - 232 mm
The model consists of parts: Barrels body screw cap inserts, Barrels body, Body part 1-4, Body part 3 insert hubs, Body part 3 insert ledge, Body part 3 insert plate, Cartridge front parts, Cartridge rear hubs, Cartridge rear parts, Cartridge rear rings, Cylinder plate inserts, Cylinder rear plate, Cylinder screw cap inserts, Cylinder, Front barrel rings, Front barrels plate, Front cap, Front sight, Hammer handle, Hammer pin, Hammer, Inner ledge, Left grip, Left side plate, Lever, Rear button, Rear ring, Rear sight part 1,2, Right grip, Right side plate, Screw cap inserts, Side trigger, Trigger.
Detail “Hammer pin” should be from metal rod with diameter 5 mm and length 28 mm.
Details “Barrels body” and “Cylinder” should be bolted together. Use stud M10 with length 285 mm, 2 nuts M10, 2 washers 10.
Use metal rod with diameter 5 mm and length 52 mm in movable joint of details “Body part 1” and “Barrels body”.
During assembling use guiding metal rods with diameter 5 mm. During assembling of Cartridges use guiding metal rods with diameter 3 mm.
Grips without lines are also attached to the STL_parts archive.
You will get 12 files
All files previously purchased will always be available for download in your Library
- Revolver_xb.zip2.42 MB
- Revolver_IGES.zip4.06 MB
- Revolver_xt.zip4.19 MB
- Revolver_STEP.zip6.19 MB
- Revolver_SAT.zip10.75 MB
- Revolver_disassembled_BIP...16.52 MB
- Revolver_disassembled_OBJ...20.23 MB
- Revolver_SW2012.zip20.25 MB
- Revolver_BIP.zip33.73 MB
- Revolver_OBJ.zip40.87 MB
- STL_parts.zip47.6 MB
- Revolver_STL.zip64.6 MB